HOME HELP FEEDBACK SUBSCRIPTIONS ARCHIVE SEARCH TABLE OF CONTENTS		QUICK SEARCH:   [advanced] Author: Keyword(s): Year:  Vol:  Page:

This Article Figures Only Full Text Full Text (PDF) Citation Map Services Email this article to a friend Similar articles in this journal Similar articles in ISI Web of Science Alert me to new issues of the journal Download to citation manager Citing Articles Citing Articles via HighWire Citing Articles via ISI Web of Science (17) Citing Articles via Google Scholar Google Scholar Articles by Crawford, W. C. Articles by Webb, S. C. Search for Related Content GeoRef GeoRef Citation

Identifying and Removing Tilt Noise from Low-Frequency (<0.1 Hz) Seafloor Vertical Seismic Data

Scripps Institution of Oceanography
University of California, San Diego
La Jolla, CA 92093-0205
wcrawford{at}ucsd.edu

Low-frequency (<0.1 Hz) vertical-component seismic noise can be reduced by 25 dB or more at seafloor seismic stations by subtracting the coherent signals derived from (1) horizontal seismic observations associated with tilt noise, and (2) pressure measurements related to infragravity waves. The reduction in effective noise levels is largest for the poorest stations: sites with soft sediments, high currents, shallow water, or a poorly leveled seismometer. The importance of precise leveling is evident in our measurements: low-frequency background vertical seismic spectra measured on a seafloor seismometer leveled to within 1 x 10^-4 radians (0.006 degrees) are up to 20 dB quieter than on a nearby seismometer leveled to within 3 x 10^-3 radians (0.2 degrees). The noise on the less precisely leveled sensor increases with decreasing frequency and is correlated with ocean tides, indicating that it is caused by tilting due to seafloor currents flowing across the instrument. At low frequencies, this tilting generates a seismic signal by changing the gravitational attraction on the geophones as they rotate with respect to the earth's gravitational field. The effect is much stronger on the horizontal components than on the vertical, allowing significant reduction in vertical-component noise by subtracting the coherent horizontal component noise. This technique reduces the low-frequency vertical noise on the less-precisely leveled seismometer to below the noise level on the precisely leveled seismometer. The same technique can also be used to remove "background" noise due to the seafloor pressure field (up to 25 dB noise reduction near 0.02 Hz) and possibly due to other parameters such as temperature variations.

This article has been cited by other articles:

				W. C. Crawford, R. A. Stephen, and S. T. Bolmer A Second Look at Low-Frequency Marine Vertical Seismometer Data Quality at the OSN-1 Site off Hawaii for Seafloor, Buried, and Borehole Emplacements Bulletin of the Seismological Society of America, October 1, 2006; 96(5): 1952 - 1960. [Abstract] [Full Text] [PDF]

				T. Dahm, F. Tilmann, and J. P. Morgan Seismic Broadband Ocean-Bottom Data and Noise Observed with Free-Fall Stations: Experiences from Long-Term Deployments in the North Atlantic and the Tyrrhenian Sea Bulletin of the Seismological Society of America, April 1, 2006; 96(2): 647 - 664. [Abstract] [Full Text] [PDF]

				Broadband Seismic Background Noise at Temporary Seismic Stations Observed on a Regional Scale in the Southwestern United States Bulletin of the Seismological Society of America, December 1, 2002; 92(8): 3335 - 3342.

				MOISE: A Prototype Multiparameter Ocean-Bottom Station Bulletin of the Seismological Society of America, August 1, 2001; 91(4): 885 - 892.

				A Broadband Ocean-Bottom Seismometer System Based on a 1-Hz Natural Period Geophone Bulletin of the Seismological Society of America, April 1, 2001; 91(2): 304 - 312.